Energy Storage Lithium Battery Pack for Self-Service Storage Machines

2026-11-16 11:06:07.776

Page views:

The Energy Storage Lithium Battery Pack from Willis is an 11.4 V, 10,000 mAh battery built for self-service storage machines. The product page lists a 3S1P configuration using the 11582150 cell, a nominal voltage of 11.4 V, a nominal capacity of 10,000 mAh and a charge voltage of 12.6 V. It is listed under Custom Batteries and Smart Home, and the application area is stated as self-service storage equipment.

Electrical Data on the Page

The charging current is listed as 2 A or less. The discharge current is 2 A, with an instantaneous discharge current of 3 A. The discharge cut-off voltage is 9 V, and the finished product internal resistance is 160 milliohms or less. The battery weighs 0.8 kg and measures 169 x 87 x 76 mm at maximum. The operating temperature is -20 to 55 degrees Celsius for charging and -20 to 60 degrees Celsius for discharge, with a storage range of -20 to 35 degrees Celsius.

The protection board covers short-circuit, overcharge, over-discharge and overcurrent protection. Those functions matter in a self-service machine because the battery may sit idle for long periods and then draw a high current when a door or a locker motor starts. The buyer should confirm the protection threshold and the recovery behavior with the actual load, because a protection board that trips too early will shut the machine down.

Cell, Casing and Build

The battery uses a soft-pack ternary lithium cell in a 3S1P arrangement. The casing is listed as bracket plus PVC. That construction gives mechanical support around the cells and a shrink-wrapped outer cover. The page does not list the connector, the wire gauge or the mounting holes, so those details should be agreed on the drawing before the order.

For a storage machine, the battery compartment should protect the pack from impact and from condensation. The pack should sit on a flat surface and be held so it cannot slide when the machine is moved. The cable should have a strain relief at the exit point. These are installation recommendations, not product claims; the page does not give an ingress protection rating.

Charging and Storage

The charge voltage is 12.6 V, which is the standard 3S lithium charge voltage. The charger should be matched to the pack and should stop at 12.6 V. A charger that holds the pack at a higher voltage will shorten the life and may trip the protection board. The page does not include a charger, so the buyer should confirm whether the machine uses its own charger or needs one supplied with the pack.

If the machine is stored for a long period, the pack should not be left fully charged or fully discharged. A partial charge and a cool, dry location are the usual practice. The page gives a storage temperature range but not a storage state of charge, so the buyer should ask for the recommended storage voltage for the specific cell.

Transport and Certification

Lithium batteries are regulated for transport. The pack should be shipped in its original carton, with the terminals protected and the state of charge at the level allowed by the carrier. The buyer should confirm the shipping mode and the documents before the first order.

The page lists the electrical and mechanical data but does not list a CE certificate, a UN38.3 report or a transport document. A buyer who needs CE certification for the European market, or a UN38.3 report for air transport, should ask for the current documents before the order. The certificate should match the exact cell, the protection board and the pack construction, because a certificate for a different build does not cover the supplied product.

Ordering

To order an Energy Storage Lithium Battery Pack, send the application, the load profile, the required runtime, the charge source, the connector type, the cable length and the quantity. If the machine is exported, state the destination market so the certification and the labeling can be checked. Willis can be reached by email at weilisi@qq.com or by telephone at +86 13143434955.

The company address is 6th Floor, Building 1, Zhongqian Intelligent Technology Industrial Center, No. 2 Jinsha Road, Dalang Town, Dongguan City, Guangdong Province. Send the machine drawing and the electrical requirement with the inquiry, and we will confirm the pack, the protection board and the connector before a quotation is issued.

Keywords: Energy Storage Lithium Battery Pack for Self-Service Storage Machines

More News

The Role of Heavy Duty LiFePO4 Batteries in Eco-Friendly Technology

The Role of Heavy Duty LiFePO4 Batteries in Eco-Friendly Technology Table of Contents Introduction to LiFePO4 Batteries What Are LiFePO4 Batteries? Advantages of LiFePO4 Batteries Safety and Stability Long Lifespan Environmental Impact Applications of LiFePO4 Batteries in Eco-Friendly Technology In Renewabl

2026.11.15

Understanding the Benefits of High Safety LiFePO4 Batteries for Consumer Electronics

High Safety LiFePO4 batteries, or Lithium Iron Phosphate batteries, have gained significant traction in the consumer electronics market due to their unique combination of safety, performance, and longevity. One of the standout features of these batteries is their inherent safety profile. Unlike other lithium-ion battery types, LiFePO4 batteries are less prone to thermal runaway, which significantl

2026.11.12

The Role of 48V LiFePO4 Battery Packs in Off-Grid Living

The Role of 48V LiFePO4 Battery Packs in Off-Grid Living Table of Contents 1. Introduction to Off-Grid Living and Energy Independence 2. Understanding 48V LiFePO4 Battery Technology 3. Key Benefits of 48V LiFePO4 Battery Packs 3.1. Extended Lifespan and Durability 3.2. Safety Features and Thermal Stability 3.3. Energy Density and Efficiency 4. Applications of 48V LiFePO4 Battery Packs in Off-Grid

2026.11.09

Unlocking the Potential of -40°C LiFePO4 Solutions in Consumer Electronics

In the realm of consumer electronics, the demand for high-performance batteries has been increasing significantly, particularly in extreme environmental conditions. One such innovation is the -40°C LiFePO4 solutions, which provide remarkable benefits for various applications. LiFePO4 technology is known for its thermal stability, safety, and longevity, making it an ideal choice for battery systems

2026.10.18